Thetype exposes the following members.
Gets And sets the time period over which observations will be averaged
Amount of sky obscured by cloud
Set to True to connect to the device hardware. Set to False to disconnect from the device hardware. You can also read the property to check whether it is connected. This reports the current hardware state.
Returns a description of the device, such as manufacturer and model number. Any ASCII characters may be used.
Atmospheric dew point at the observatory
Descriptive and version information about this ASCOM driver.
A string containing only the major and minor version of the driver.
Atmospheric humidity at the observatory
The interface version number that this device supports. Must return 1 for this interface version.
The short name of the driver, for display purposes
Atmospheric pressure at the observatory
Rain rate at the observatory
Sky brightness at the observatory
Sky quality at the observatory
Sky temperature at the observatory
Seeing at the observatory measured as star full width half maximum (FWHM) in arc secs.
Returns the list of custom action names supported by this driver.
Temperature at the observatory
Wind direction at the observatory
Peak 3 second wind gust at the observatory over the last 2 minutes
Wind speed at the observatory
Invokes the specified device-specific custom action.
Transmits an arbitrary string to the device and does not wait for a response. Optionally, protocol framing characters may be added to the string before transmission.
Transmits an arbitrary string to the device and waits for a boolean response. Optionally, protocol framing characters may be added to the string before transmission.
Transmits an arbitrary string to the device and waits for a string response. Optionally, protocol framing characters may be added to the string before transmission.
Dispose the late-bound interface, if needed. Will release it via COM if it is a COM object, else if native .NET will just dereference it for GC.
Forces the driver to immediately query its attached hardware to refresh sensor values
Provides a description of the sensor providing the requested property
Launches a configuration dialog box for the driver. The call will not return until the user clicks OK or cancel manually.
Provides the time since the sensor value was last updated